The All-In-One Angled Power Strip with LED Lighting gives you the best of both worlds to provide power and lighting for your project, by combining the Slimline Angled Power Strip (APT) and the Premium Under Cabinet LED light strips (SG9) in one unit.
LP Series UL approved meets 15 or 20 amp branch circuit requirements with its single 15 amp outlets. Fixtures are 20 Amp Rated (internally 12 Gauge wire), with 15 Amp single receptacles. A 20 Amp device will not plug into this fixture.
This compact, 1 5/8 inch high x 2 5/8 wide low profile extruded aluminum fixture comes assembled with concealed wire management wireways, and hidden poke-home hidden connectors make for an easy installation.
All LED fixtures require a low voltage power source (called Driver) to supply current to the LED’s. Depending on your lighting requirements drivers are integrated into some of the models offered and others without; this is covered in detail below.
Note: “Task Lighting's LED policy is that the warranty is VOID on the LED if the customer supplied there own driver(s) because of the many variations in drivers due to the lack of protection circuits and quality of the 12 volt DC outputs that can cause failures.”
However, before getting into all the features and options, a definition of the lighting parameters are given.
Light Color and Intensity
Today all LED lighting color is rated as either warm white (2700k) or natural (3000k). Where the letter “k” means Kelvin Temperature. The amount of light produced is measured in lumens of which 880 lumens is equivalent to the old style 60-watt incandescent light bulb. Understanding this concept will help you select the correct wattage of the LED lighting strips. Two wattages are available to select from, being either quarter-watt (414 lumens per foot) or half-watt (540 lumens per foot). There is an approximate 23% difference between the two wattages.
Mostly used for a self-contained fixture with a single on/off control of the lights within the strip. These All-In-One Angled Power Strips with LED Lighting contain the Driver and an on/off switch. Wattage is limited to Quarter watt units in sizes ranging from 10 ½” to 36 ½, and Half watt units ranging from 10 ½” to 24 ½”. These are the largest lengths available because of driver physical size limitations. However, there is another solution for sizes up to 90 ½” which are the Flexible Model units. Also, lengths over 90 1/2" are available by butting two or more fixtures together.
Flexible Model – using Remote/External Driver(s)
The flexible design models provide the most versatile configuration for the All-in-One Angled Power Strip. The driver(s) are mounted externally, e.g., in the base of a cabinet behind the drawers, etc. The on/off switch is optional because there may be a requirement to control multiple fixtures from one switch.
Ultimate Design and Control
For those design configurations that require additional features, such as adding 3-way switches, 4-way switch, dual rocker switches, USB Chargers, etc. splitting the power strip from the LED lighting is an alternative to the All-in-One fixtures. The TR Series Angled Power Strip and the Premium SG9 Series are available for this type of solution.